971欧美午夜电影院,成人欧美XXXX大片,丝袜美腿www在线观看,熟妇的荡欲BT下载美国,水蜜桃成人网视频在线,年轻少妇胸大喷水流汁高潮

Location:Home > Product > Epoxy resin Potting > Infomation  

Epoxy Casting Resin 9000A/H-120B

Orgin:epoxy-cn.com | Write:Admin | View: | AddDate:2010/6/18
Purchase, please contact Mr. Wang: 13771380144

 

 

1.      Description

9000A/H-120B is a filled、low viscosity、two parts epoxy resin . It offers excellent flexibility and other good electrical mechanical properties after cured.

2.      Product data

Items

Method or condition

9000A

H-120B

Appearance

Visual

Black viscous liquid

Light yellow liquid

Viscosity

40°C, mPa×s

3000~6000

120~160

Density

25°C,g/ml

1.4~1.5

1.08~1.15

Shelf-life

R.T.

6 month

12 month

 

3.  Handling properties*

Items

Condition

9000A/H-120B

Mixing ratio

By weight

100:40

Pot life

25°C, min

40

Typical cure schedule

°C/h

25/48 or 60/3

4.  Application

 Suitable for casting of middle and small electronic component.

5.Properties after curing

Items

Condition

9000A/H-120B

Hardness

Shore-A

<90

Breakdown

25℃,kv/mm

>18

Thermal-shock

-20~80℃

>10 cycle

Shrink rate

%

<0.3

Tensile strength

MPa

>2

Elongation at break

%

50-80

Elasticity modulus

MPa

5-7

Water absorption

23/24h,%

<1

Volume resistivity

25℃,Ω·cm

>1010

6. Health precaution :

Using this product must obey relative health rules.

7. Precaution

〔Protection for work place〕

Protective garments     needed

Glove                  needed

Goggles                needed

Mask                   not recommended

〔Skin protection〕

Before work             coat protective cream on exposed skin

After work               coat nourish cream on exposed skin

Cleaning skin            wipe the material from skin with paper, then wash shin with warm water and soap and rinse with clear water

〔Clean the work place〕

    Cover the worktable with light-color paper and use paper cup

〔Treatment of overflowing material〕

Use cotton or sawdust to absorb material then put it into plastic bag.

〔Ventilate〕

Work place                 Ventilate constantly

                         Operator should avoid breathing vapors

〔Emergency treatment〕

l         If eyes contact epoxy、hardener or mixture, flush thoroughly with clear water for 15 minutes ,then seek medical treatment。

l         Wipe the material from skin, and then wash exposed areas immediately using warm water and soap. If skin is seriously imitated medical treatment is needed.

l         Avoid breathing vapors, which can cause respiratory damage.

l         Any unusual phenomena’s appear, seek medical treatment

8.Packaging

A: 25KG.        B: 20KG.

Ú Note: The data above are typical tested at a relative humidity of 70 % and a temperature of 25℃. They are just for customers’ reference. We cannot wholly guarantee all the listed data will be reached under specific test conditions. When applying the product, the customers should use data obtained through their own testing.


Next:None
Copyright © www.epoxy-cn.com All Rights Reserved
Powered By eims_cms V 3.3
支持EIMS,請(qǐng)勿刪除,謝謝!EIMS